Checking Shock Absorber - AR32.25-P-0121SR

MODEL 453 

	Remove
1	Remove front shock absorbers	When checking the front shock absorbers.	AR32.25-P-1018SR
2	Remove rear shock absorbers	When checking the rear shock absorbers.	AR32.25-P-0110SR
	Check
3	Check damper for external oil leaks	A thin film of oil on the shock absorber is permissible. If there are problems: ↓ Replace shock absorber. * not for USA ↓ Service Information: Replacement of shock absorbers	SI32.25-P-0002A
4	Check piston rods for surface damage, bending and for unimpeded movement in the pilot bushing	If there are problems: ↓ Replace shock absorber. * not for USA ↓ Service Information: Replacement of shock absorbers	SI32.25-P-0002A
5	Check elastomer bearings in housing eye	When checking the rear shock absorbers. The elastomer bearings must be seated securely in the housing eye and must not be cracked or damaged. If there are problems: ↓ Replace shock absorber. * not for USA ↓ Service Information: Replacement of shock absorbers	SI32.25-P-0002A
	Install
6	Install front shock absorbers	After checking the front shock absorbers.	AR32.25-P-1018SR
7	Install rear shock absorbers	After checking the rear shock absorbers.	AR32.25-P-0110SR