Remove/Install Seat Belt Buckle (Front Seat) - AR91.40-P-1515SR
MODEL 453
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Switch off ignition and remove transmitter key from electronic ignition lock control unit | ||
| 2 | Unscrew bolt (3) | ||
| 3 | Unclip cup holder (1) | Figure | |
| 4 | Disconnect electrical connector (2) and remove cup holder (1) | ||
| 5 | Move front seat (4) all the way to the rear | ||
| 6 | Remove bolt (6) | *BA91.40-P-1009-01SR | |
| 7 | Disconnect electrical connector (5) from driver's seat connector block (X55/3) or front passenger seat connector block (X55/4) | ||
| 8 | Unclip seat belt buckle electrical wiring harness (9) from bracket (8) and remove seat belt buckle (7) with the seat belt buckle electrical wiring harness (9) upwards | Figure | |
| 9 | Install in the reverse order | ||
| Check | |||
| 10 |
Check supplemental restraint system using diagnostic system | AD00.00-P-2000-06SR |
SEAT BELTS/EMERGENCY TENSIONING RETRACTORS
| Number | Designation | MODEL 453.3 | MODEL 453.0 | |
|---|---|---|---|---|
| BA91.40-P-1009-01SR | Screw/bolt, seat belt buckle to seat frame | Nm | 21 | 21 |