Remove/Install Wheel Brake Cylinder - AR42.10-P-0167SR

MODEL 453 

Courtesy of MERCEDES-BENZ USA

	Risk of poisoning  from swallowing brake fluid. Risk of injury  from skin and eye contact with brake fluid	Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
	Notes on repairs to brake system		AH42.00-P-0003-01A
	Brake fluid notes		AH42.50-P-0001-01A
	Remove/install
1	Remove left or right brake shoe from rear axle		AR42.10-P-0165SR
2	Unscrew retaining screw of brake line (2) from wheel brake cylinder (1)	Removal:  Collect brake fluid in a suitable container. : Do not bend the brake line (2), and check the routing, leaktightness and clearance for the rear axle. Retaining screw, brake line to rear wheel brake cylinder	*BA42.10-P-1006-04SR
3	Immediately seal off the connections for the brake line (2) and wheel brake cylinder (1) 1-5	Record plug	Figure
4	Remove bolts (3) and wheel brake cylinder (1)	Bolt, wheel brake cylinder to brake cover plate	*BA42.10-P-1001-16D
	Clean
5	Clean brake cover plate (4)
6	Install in the reverse order
7	Bleed brake system		AR42.10-P-0010SR

DRUM BRAKE

Number	Designation		MODEL 453
BA42.10-P-1001-16D	Bolt, wheel brake cylinder to brake cover plate	Nm	9

BRAKE LINES, BRAKE HOSES

Number	Designation	MODEL 453
BA42.10-P-1006-04SR	Retaining screw, brake line to rear wheel brake cylinder	15

Fig 1: Identifying Record Plug (129 589 00 91 00)

Courtesy of MERCEDES-BENZ USA