Remove/Install Fender Liner In Rear Fender - AR88.10-P-1400SRA

MODEL 453.3/4 

Shown on left side of vehicle 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove relative rear wheel		AR40.10-P-1100SR
2	Remove plastic clips (2)	Mounting version can vary. Clip remover	Fig 1
3	Unscrew bolts (3)	Mounting version can vary.
4	Remove expansion rivet (4)	Mounting version can vary. Clip remover	Fig 1
5	Pull outer edge of fender liner (1) toward inside out of wheel arch lip and remove fender liner (1) downward
6	Install in the reverse order

Fig 1: Identifying Clip Remover (452 589 01 63 00)

Courtesy of MERCEDES-BENZ USA