Remove/Install Instrument Cluster - AR54.30-P-6015SR
MODEL 453
Shown with code K36 (Instrument cluster wit color 8.9 cm (3.5") display)
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Connect diagnostic unit and perform initial startup of instrument cluster (A1) | When replacing the instrument cluster (A1). | |
| AD00.00-P-2000-06SR | |||
| 2 | Move steering wheel back and down | Model 453 with code J37 (Vertically adjustable steering column) |
|
| 3 | Unclip cover (1) towards steering wheel (arrow A) | Fig 1 | |
| 4 | Remove bolt (12) and unclip cover (2) upwards | ||
| 5 | Unclip cover panel with air vent (4) at left | Fig 1 | |
| 6.1 | Remove stowage compartment from instrument panel | Model 453 with code C08 (Basic fittings f. radio) |
|
| 6.2 | Remove radio | Model 453 with code 537 (smart Audio system) |
AR82.60-P-7502SR |
| 6.3 | Remove communication unit | Model 453 with code 535 (smart Media system) |
AR82.85-P-2000SR |
| 7 | Remove cover panel from center of instrument panel | ||
| 8 | Remove bolts (13) | ||
| 9 | Remove frame (3) | ||
| 10 | Remove bolts (14) | ||
| 11 | Remove instrument cluster (A1) far enough to gain access to the electrical connector (23) | ||
| 12 | Detach electrical connection (23) and remove instrument cluster (A1) | ||
| 13 | Install in the reverse order |