Remove/Install Rear Right Brake Line From ESP® Hydraulic Unit To Underfloor - AR42.10-P-0002SR

MODEL 453 

Shown on MODEL 453.3 

Courtesy of MERCEDES-BENZ USA

	Risk of poisoning  from swallowing brake fluid. Risk of injury  from skin and eye contact with brake fluid	Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
	Notes on repairs to brake system		AH42.00-P-0003-01A
	Brake fluid notes		AH42.50-P-0001-01A
	Remove/install
1	Remove left rear brake line from hydraulic unit (2) to underfloor		AR42.10-P-0003SR
2	Disconnect left rear brake line (1) from hydraulic unit (2) and seal off connections	Retaining screw, brake line to hydraulic unit	*BA42.10-P-1004-04SR
		Record plug	Fig 1
3	Disconnect right rear brake line (1) at connecting point (3) and seal off connections	Retaining screw, brake line to threaded socket	*BA42.10-P-1005-04SR
		Record plug	Fig 1
4	Unclip right rear brake line (1)	: Make sure that the right rear brake line (1) is seated correctly.
5	Remove right rear brake line (1)	Do not kink or bend the right rear brake line (1). Leaks can occur otherwise.
6	Install in the reverse order

BRAKE LINES, BRAKE HOSES

Number	Designation		Model 453
BA42.10-P-1004-04SR	Retaining screw, brake line to hydraulic unit	Nm	14

BRAKE LINES, BRAKE HOSES

Number	Designation			Model 453
BA42.10-P-1005-04SR	Retaining screw, brake line to threaded socket	Stage 1	Nm	8
		Stage 2	∠°	40

Fig 1: Identifying Record Plug (129 589 00 91 00)

Courtesy of MERCEDES-BENZ USA