Check wet boiling point of brake fluid - AP42.00-P-4298MCC
MODEL 451.3/4
| Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | AS42.50-Z-0001-01A | |
| Notes on repairs to brake system | AH42.00-P-0003-01A | ||
| Brake fluid notes | AH42.50-P-0001-01A | ||
| Check | |||
| 1 | Open brake fluid reservoir | ||
| 2 | Fold up folding cover (1) on brake fluid measuring device (4) | ||
| 3 | Using pipette (2) coat a few droplets of brake fluid onto the prism surface (3) and carefully fold down the folding cover (1) | ||
| 4 | Direct the brake fluid measuring device (4) towards the bright light source and read off the wet boiling point of the brake fluid through the eyepiece (5) | If the wet boiling point is below the limit: ↓ Replace the brake fluid subject to a separate repair order. |
AP42.00-P-4280MCC |
| 5 | Clean brake fluid measuring device (4) with water and dry | ||
| 6 | Dispose of pipette (2) | ||
| 7 | Seal brake fluid reservoir |