Remove and install air conditioning control and operating unit - AR83.25-P-1124MCF
MODEL 451.3/4 as of 31.8.10
with CODE (I01) Air conditioning Plus except CODE (P02) car2go
| Remove/install | |||
| 1 | Remove center air vent | AR68.10-P-1150MCF | |
| 2 | Remove bolts (1) | ||
| 3 | Unhook heater operating unit/A/C (N23) from bracket (arrow) at left and right and remove | ||
| 4 | Remove flexible shaft (2) | When the operating unit is replaced Heater/AC (N23). | AR83.10-P-1401MCC |
| 5 | Install in the reverse order | ||
| 6 | Perform function test on heater/air conditioning operating unit (N23) |