LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Propeller Shaft - 212 Chassis) >> Testing & Repair >> Release fitting sleeves on flex disks - AR41.10-P-0050-09TX

Release fitting sleeves on flex disks - AR41.10-P-0050-09TX

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 166, 204, 207, 212, 218, 219, 221, 231, 292 

REFER TO SHOP-MADE TOOLS Drift for releasing the fitting sleeves in the flexible couplings   WF58.50-P-4110-01A

Propeller shaft shown when installed 

Fig 1: Installed Propeller Shaft
G10241429Courtesy of MERCEDES-BENZ USA

Propeller shaft shown when removed 

Fig 2: Removed Propeller Shaft
G10241430Courtesy of MERCEDES-BENZ USA
  1. Loosen the fitted sleeves of the flexible couplings at the transmission and rear axle center assembly using the drift (shop-made tool).

    IMPORTANT By moving from side to side.

scientia non olet · About LEMON Manuals