Prepare electronic propeller shaft inclinometer - AR41.10-P-0086-02P
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
Switching on meter
- Switch on electronic propeller shaft articulation angle meter To do this, press the ON button.
The version and the serial number are displayed for several seconds. Either the selection menu or main menu then appears, depending on which meter you are using
Start screen
Courtesy of MERCEDES-BENZ USA
Selection measuring program
- Press the "STEP" button.
Articulation angle measurement is selected.
Courtesy of MERCEDES-BENZ USA
Erasing memory
The Erase memory function allows you to erase the memory before measuring an angle for the second time. However, this is not essential, as after the first angle has been stored, the angles from previous measurements are erased from the memory. The memory is likewise erased if the inclinometer is switched off in the meantime.
- Press the "MEMORY" button.
The values saved in the memory are displayed.
Courtesy of MERCEDES-BENZ USA
Main menu screen
The values of the preceding articulation angle measurement are displayed.
- Press "SAVE" button.
Memory screen
Courtesy of MERCEDES-BENZ USA
You are asked to confirm that you want to erase the memory before the values are actually deleted.
- Press "STEP" button.
The memory is erased.
Inquiry screen
Courtesy of MERCEDES-BENZ USA
The confirmation that you want to erase the memory is displayed for a short time. The main menu then appears again.
Confirmation screen
Courtesy of MERCEDES-BENZ USA