Assembly and covering work when painting the front fender - AR98.00-P-0205EW

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 212, 218

Shown on model 212.0 with paint stage 2/3

Fig 1: Protecting Front Fender Paint Applying Area

Courtesy of MERCEDES-BENZ USA

	Masking, taping
	Notes on paintwork repairs		AH98.00-P-9408-02A
	General information on masking for paintwork		AH98.00-P-0200-01BK
1	Detach front bumper	It is not necessary to remove front bumper; this can remain on the vehicle.
		Model 212	AR88.20-P-2000EW
		Model 218	AR88.20-P-2000EL
2	Remove model badge and trim strip	Trim strip must always be replaced.
3	Open engine hood
4	Mask off left front lamp unit or right front lamp unit and side longitudinal member paneling
	Cleaning plastic cover plates of lamps		AH82.10-P-1002-01A
5	Mask off front fender all around edge
6	Cover complete vehicle