General repair methods for wiring harness - AR00.19-P-0100A
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 117, 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 199, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 240, 242, 245, 246, 251, 414, 450, 451, 452, 454, 461, 463
| Risk of injury . Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Risk of injury caused by burns to skin and eyes. Risk of poisoning caused by inhaling fumes when working with heat-shrinkable tubing. | Work in well ventilated rooms only. Wear safety glasses with side protection and protective gloves. | AS00.19-Z-0001-01A | |
| Risk of injury caused by burns to skin and eyes, risk of poisoning caused by inhaling fumes during soldering. | Wear protective gloves, protective clothing and safety glasses. Ensure that the work area is adequately ventilated. Secure power supply cables. Avoid sources of fire in working area. | AS00.19-Z-0002-01A | |
| Notes on replacement of safety-relevant and special components | AH00.19-P-1000-08A | ||
| Notes on soldering | AH00.19-P-1000-10A | ||
| Notes on crimping | AH00.19-P-1000-09A | ||
| Assessment of damage in wiring harnesses | AH00.19-P-1000-05A | ||
| Notes on the use of paint scraping nuts on ground connections | AH00.19-P-1000-20A | ||
| Evaluation of high-voltage components | AH54.00-P-6500-01SXH | ||
| Notes on cable protection | AH00.19-P-1000-11A | ||
| Notes on soft soldering | AH00.19-P-1000-07A | ||
| Repair methods for wiring harnesses | AH00.19-P-1000-04A | ||
| Advantages of repairing wiring harnesses | AH00.19-P-1000-03A | ||
| Notes regarding plug connections | AH00.19-P-1000-06A | ||
| Repair wiring harness | |||
| 1.1 | Removing contacts from plugs and connectors | MODEL 117, 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 199, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 240, 242, 245, 246, 251, 414, 450, 451, 452, 454, 461, 463 | |
| If required for wiring harness repair. | AR00.19-P-0120A | ||
| Female contacts and contact pins, installation survey, as-built configuration | MODEL 124, 126, 129, 140, 163, 164, 168, 169, 170, 171, 199, 202, 203, 204, 208, 209, 210, 211, 215, 216, 219, 220, 221, 230, 240, 245, 251, 414, 461, 463 up to 5/31/12 | GF00.19-P-7000A | |
| Plugs and couplings as-built configuration | MODEL 124, 126, 129, 140, 163, 164, 168, 169, 170, 171, 199, 202, 203, 204, 208, 209, 210, 211, 215, 216, 219, 220, 221, 230, 240, 245, 251, 414, 461, 463 up to 5/31/12 | GF00.19-P-8000A | |
| 1.2 | Repair wiring harness by means of solder connector sleeve | MODEL 117, 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 199, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 240, 242, 245, 246, 251, 414, 450, 451, 452, 454, 461, 463 With soldering end sleeves. |
|
| AR00.19-P-0100-09A | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| 1.3 | Repair wiring harness by means of axial solder connectors | MODEL 117, 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 199, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 240, 242, 245, 246, 251, 414, 450, 451, 452, 454, 461, 463 For axial solder connector and conductor cross section ≥ 0.35 mm2 . |
|
| AR54.18-P-0100-06A | |||
| 1.4 | Repair wiring harness with conductor cross section of 0.13 mm2 using axial solder connector | MODEL 117, 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 199, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 240, 242, 245, 246, 251, 414, 450, 451, 452, 454, 461, 463 | |
| For axial solder connector and conductor cross section of 0.13 mm2 . | AR00.19-P-0100-12A | ||
| Figure | |||
| 1.5 | Repair wiring harness by crimping | MODEL 117, 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 199, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 240, 242, 245, 246, 251, 414, 450, 451, 452, 454, 461, 463 With round cable wiring harness. |
|
| AR00.19-P-0100-03A | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| 1.6 | Repair flat conductor wiring harness by crimping | MODEL 117, 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 199, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 240, 242, 245, 246, 251, 414, 450, 451, 452, 454, 461, 463 With flat conductor wiring harness. |
|
| MODEL 164, 204, 211, 216, 219, 221, 251 | AR00.19-P-0100-10A | ||
| Fig 4 | |||
| 1.7 | Repair wiring harness by crimping with watertight connections | MODEL 117, 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 199, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 240, 242, 245, 246, 251, 414, 450, 451, 452, 454, 461, 463 If the repair point has to be watertight. |
|
| AR00.19-P-0100-04A | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| 1.8 | Repairing cable harness by soldering | MODEL 117, 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 199, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 240, 242, 245, 246, 251, 414, 450, 451, 452, 454, 461, 463 With solder cups. |
|
| AR00.19-P-0100-05A | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| 1.9 | Repair cable harness using rapid connection technology | MODEL 117, 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 199, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 240, 242, 245, 246, 251, 414, 450, 451, 452, 454, 461, 463 With rapid connection technology. |
|
| AR00.19-P-0100-06A | |||
| 1.10 | Protect repair area after cable repairs | MODEL 117, 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 199, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 240, 242, 245, 246, 251, 414, 450, 451, 452, 454, 461, 463 | |
| AR00.19-P-0100-08A | |||
| 1.11 | Checking wiring harness | MODEL 117, 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 199, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 240, 242, 245, 246, 251, 414, 450, 451, 452, 454, 461, 463 | |
| AR54.18-P-0600-01A | |||
| Figure | |||
| Figure |