Remove/install the pneumatic pump for dynamic seat control - AR91.25-P-1580EW
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212 with CODE 432 (Left and right dynamic multicontour seat)
MODEL 218 with CODE 432 (Left and right dynamic multicontour seat)
Shown on MODEL 212.0 with CODE 810 (Sound system)
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1.1 | Switch off ignition and remove transmitter key from electronic ignition lock control unit | MODEL 212 with CODE 432 (Left and right dynamic multicontour seat) without CODE 889 (KEYLESS-GO) MODEL 218 with CODE 432 (Left and right dynamic multicontour seat) without CODE 889 (KEYLESS-GO) |
|
| 1.2 | Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit | MODEL 212 with CODE 432 (Left and right dynamic multicontour seat) with CODE 889 (KEYLESS-GO) MODEL 218 with CODE 432 (Left and right dynamic multicontour seat) with CODE 889 (KEYLESS-GO) |
|
| 2.1 | Remove left side lining (1) in trunk | MODEL 212 with CODE 432 (Left and right dynamic multicontour seat) MODEL 218.3 with CODE 432 (Left and right dynamic multicontour seat) |
|
| MODEL 212.0/1 with CODE 432 (Left and right dynamic multicontour seat) |
|||
| MODEL 218.3 with CODE 432 (Left and right dynamic multicontour seat) |
AR68.30-P-4600EL | ||
| 2.2 | Remove left side load compartment lining | MODEL 212.2 with CODE 432 (Left and right dynamic multicontour seat) MODEL 218.9 with CODE 432 (Left and right dynamic multicontour seat) |
|
| MODEL 212.2 with CODE 432 (Left and right dynamic multicontour seat) |
AR68.30-P-1180ES | ||
| MODEL 218.9 with CODE 432 (Left and right dynamic multicontour seat) |
AR68.30-P-1180ELX | ||
| 3 | Remove left side cargo area soundproofing | MODEL 212.2 with CODE 432 (Left and right dynamic multicontour seat) |
|
| 4 | Unscrew nuts (3), release nut (2) and place bracket (4) with sound system amplifier control unit (N40/3) to one side | MODEL 212 with CODE 432 (Left and right dynamic multicontour seat) with CODE 810 (Sound system) MODEL 218 with CODE 432 (Left and right dynamic multicontour seat) with CODE 810 (Sound system) |
|
| Notes on avoiding damage to optical fibers during repair work | AH82.60-P-0001-05AK | ||
| 5 | Unscrew nuts (5) and remove bracket (6) | ||
| 6 | Unclip cover (7) from bracket (6) and place to one side with attached pneumatic line (8) | ||
| 7 | Remove active multicontour seat pneumatic pump (M40/1) with foam insert (9) from bracket (6) | ||
| 8 | Remove foam insert (9) | ||
| 9 | Disconnect electrical connector (10) | ||
| 10 | Unclip catch hooks (arrows) and remove pneumatic connecting block (11) | ||
| 11 | Remove active multicontour seat pneumatic pump (M40/1) | ||
| 12 | Install in the reverse order | ||
| 13 | Connect diagnostic system and activate active multicontour seat pneumatic pump (M40/1) using diagnostic system | When replacing active multicontour seat pneumatic pump (M40/1). | |
| AD00.00-P-2000-04A |