Remove/install rear seat backrest cover - AR91.18-P-1870CW
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 204.0 except CODE (287) Through-loading feature
MODEL 212.0/1 except CODE (224) Rear individual seat design except CODE (287) Through-loading feature
Shown on model 204.0
Shown on model 212.0
| Remove/install | |||
| 1 | Remove all head restraint guides from rear seat backrest | AR91.16-P-1775CW | |
| 2 | Remove rear seat backrest | AR91.12-P-1620CW | |
| 3 | Unhook cover (3) from wire loops in padding (2) in areas A and B | ||
| 4 | Unhook cover (3) from backrest frame (1) in areas C and D | ||
| 5 | Slip cover (3) over padding (2) | ||
| 6 | Unclip staple wires (4) from padding (2) | ||
| 7 | Pull staple wires (4) out of cover (3) | Model 204 | |
| 8 | Unclip staple wires (6) from padding (2) | ||
| 9 | Unclip staple wires (5) from padding (2) | ||
| 10 | Turn over cover (3) with padding (2) | Model 212 | |
| 11 | Unhook cover (3) from wire loops in padding (2) in areas E | Model 212 | |
| 12 | Lift cover (3) and guide electrical wiring harness for seat heater (7) through padding (2) | Model 212 with code (872) Electric seat heaters for left and right rear seats | |
| 13 | Remove cover (3) from padding (2) | ||
| 14 | Pull staple wires (5, 6) out of cover (3) | Model 204, when replacing the cover (3). | |
| 15 | Install in the reverse order |