Remove/install pedestrian protection sensor - AR91.60-P-0950EX
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212 with CODE (U60) Pedestrian protection
Sensor at front crossmember
| Remove/install | |||
| 1 | Disconnect battery ground line | AR54.10-P-0003EW | |
| 2 | Remove radiator paneling (1) | ||
| 3 | Disconnect electrical connector (2) at center front bumper pedestrian protection sensor (B151/2) | ||
| 4 | Unscrew bolt (3) | *BA91.60-P-1011-01M | |
| 5 | Remove center front bumper pedestrian protection sensor (B151/2) | ||
| 6 | Install in the reverse order |
AIRBAG
| Number | Designation | Model 212 | |
|---|---|---|---|
| BA91.60-P-1011-01M | Bolt, frontal acceleration sensor to bracket | Nm | 8 |