LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Seats, Bunks, Restraint Systems - 212 Chassis - 2 Of 3) >> Testing & Repair >> Remove/install front seat heat restraint motor - AR91.29-P-1432CW

Remove/install front seat heat restraint motor - AR91.29-P-1432CW

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 204.0 (except 204.077), 204.2 (except 204.277), 204.3/9 with CODE 242 (Electrically adjustable front passenger seat with memory) with CODE 275 (Memory package (driver seat, steering column, mirrors)) 

MODEL 207 

MODEL 212, 218 with CODE 275 (Electrically adjustable front seats memory package) 

MODEL 463.202/236/237 as of model year 2010 up to model year 2013 

MODEL 463.222/270/271/303/340/341 as of model year 2010 

MODEL 463.306/336 

MODEL 463.346 as of model year 2012 up to model year 2013 

Shown on model 204.052 

Fig 1: Front Seat Heat Restraint Motor Remove/Install Components
G09978054Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
DANGER Risk of injury  caused by scraping or cutting body parts on sharp vehicle parts Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.
AS00.00-Z-0017-01A
NOTES Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
1 Remove left or right head restraint (1) MODEL 212, 218
with CODE 275 (Electrically adjustable front seats memory package)
MODEL 463.306/336
AR91.16-P-0040CW 
MODEL 204.3, 207 AR91.16-P-0040EC
2 Disconnect electrical connector (2) from driver seat head restraint adjustment motor (M27/4) or front passenger seat head restraint adjustment motor (M28/4)    
3 Push driver seat head restraint adjustment motor (M27/4) or front passenger seat head restraint adjustment motor (M28/4) upwards (arrow), then to the right side (arrow) and then remove downwards INSTALLATION IMPORTANT Ensure that spring U-bolt (3) and hook (4) are seated correctly in backrest frame.  
4 Install in the reverse order