Remove/install front seat cushion ventilation motors - AR91.30-P-1950EW

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 463.202/222/236/237/270/271/303/340/341 with CODE S50 (Seat ventilation for driver and co-driver seats) as of model year 2010

MODEL 463.306/336/346 with CODE S50 (Seat ventilation for driver and co-driver seats)

MODEL 204.0 (except 204.077), 204.2 (except 204.277), 204.9, 212 with CODE 401 (Front deluxe seats, incl. seat heating and seat ventilation)

Shown on model 212.057

Fig 1: Front Seat Cushion Ventilation Motors Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove cover (1) at front seat cushion	MODEL 204, 212	AR91.18-P-1800CW
1	Remove cover (1) at front seat cushion	MODEL 463	AR91.18-P-1800GP
2	Lift net (4) at padding (2) and remove left front seat cushion seat ventilation motors (M18/9) or right front seat cushion seat ventilation motors (M18/11) from the padding (2)	Transfer installation position of left front seat cushion seat ventilation motors (M18/9) or right front seat cushion seat ventilation motors (M18/11) to be replaced at padding (2) to new left front seat cushion seat ventilation motors (M18/9) or right front seat cushion seat ventilation motors (M18/11).
3	Expose electrical wiring harness (3) at padding (2) and guide out with left front seat cushion seat ventilation motors (M18/9) or right front seat cushion seat ventilation motors (M18/11) under lifted net (4)
4	Install in the reverse order