Replace rear crankshaft radial sealing ring - AR03.20-P-3063SXI

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 642 in MODEL 207, 212, 218, 221, 222

Fig 1: Replacing Rear Crankshaft Radial Seal

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove end cover (2)		AR01.40-P-8913SXI
1	Remove end cover (2)	The end cover (2) must be completely replaced since rear crankshaft radial sealing ring (3) in end cover (2) is vulcanized in. Leaks may occur otherwise. The end cover (2) and the rear crankshaft radial sealing ring (3) can only be replaced together.
2	Install in the reverse order