Inspect crankshaft bearing cap bolts - AR03.20-P-4351-03T
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 646.8/951/961/962/963/966, 647.961, 648.960/961, 651, 654
CHECK VALUES FOR CRANKSHAFT BEARING CAP BOLTS
| Number | Designation | Engine 646, 647, 648 | ||
|---|---|---|---|---|
| BE03.20-P-1001-01A | Crankshaft bearing cap bolts | Thread diameter | M | 11 |
| Length (L) when new | mm | 61.8 to 62.2 | ||
| Max. length (L) | mm | 63.8 | ||
| See picture | AR03.20-P-4351-03A | |||
CHECK VALUES FOR CRANKSHAFT BEARING CAP BOLTS
| Number | Designation | Engine 651 | ||
|---|---|---|---|---|
| BE03.20-P-1001-01F | Crankshaft bearing cap bolts | Thread diameter | M | 12 |
| Length (L) when new | mm | 104.7 to 105.3 | ||
| Max. length (L) | mm | 106.5 | ||
| See fig. | AR03.20-P-4351-03A | |||
- Measure length (L).
If length (L) is greater than the maximum permissible dimension, use new bolts.