Overview of operations not controlled via workshop code - AP00.20-P-0047U
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 117, 156, 164, 166, 169, 171, 172, 176, 190, 197.3/4, 203, 204, 205, 207, 209, 211, 212, 216, 217, 218, 219, 221, 222, 230, 231, 242, 245, 246, 251, 461, 463
| Ex-factory driving aids are to be checked at every service | |||
| Overview of checking operations on ex factory driving aids | MODEL 156, 169, 172, 176, 204, 205, 207, 212, 217, 218, 221, 222, 242, 245, 246 (with driving aids ex factory) The additional operation for the driving aids ex factory must be manually selected in the MSS workflow under "Define additional operations". |
AP86.20-P-8649U | |
| In ECE countries the dust filter is to be replaced after more than 25, 000 km (15, 500 mi) or 2 years' difference to the last changed; in countries outside the ECE the dust filter is to be replaced at every service | |||
| Replace dust filter for heating/air conditioning | MODEL 205 The additional operation for replacing the dust filter must be manually selected/deselected in the MSS workflow under "Define additional operations". |
AP83.00-P-8381B | |
| The AdBlue® tank is to be filled at every service after consultation with the customer | |||
| Fill AdBlue(R) tank | MODEL 164, 166, 212, 218, 221, 251 with ENGINE 642 with CODE U42 (BlueTEC diesel exhaust treatment (SCR)) MODEL 166, 204.9, 212 with ENGINE 651 with CODE U42 (BlueTEC diesel exhaust treatment (SCR)) MODEL 205 with ENGINE 626, 651 with CODE U42 (BlueTEC diesel exhaust treatment (SCR)) MODEL 205 with ENGINE 626, 651 with CODE U77 (Diesel Emission control BLUETEC (SCR)) MODEL 207 with ENGINE 642, 651 with CODE U42 (BlueTEC diesel exhaust treatment (SCR)) with CODE U77 (Diesel Emission control BLUETEC (SCR)) MODEL 222 with ENGINE 642 MODEL 222 with ENGINE 651 MODEL 463.306/336/346 with ENGINE 642.886 The additional operation for filling the AdBlue® tank must be manually selected/deselected in the MSS workflow under "Define additional operations". |
AP14.40-P-1410BT |