LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Electrical System - Body - 212 Chassis - 3 Of 8) >> Testing & Repair >> Removing and installing headlamp for daytime running light >> Removing and installing headlamp for daytime running light - AR82.10-P-2300EX

Removing and installing headlamp for daytime running light - AR82.10-P-2300EX

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 212.077/277 up to model year 2014 

Shown on left side of vehicle 

Fig 1: Daytime Running Light Headlamp Remove/Install Components - Shown On Left Side
G09977559Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
1 Remove front bumper (1)   AR88.20-P-2000EW
2 Remove impact absorber (2) at bumper (1)    
3 Remove screws/bolts (3)    
4 Remove left daytime running lights headlamp (E1/3) or right daytime running lights headlamp (E2/3) from bumper (1) INSTALLATION IMPORTANT Ensure that left daytime running lights headlamp (E1/3) or right daytime running lights headlamp (E2/3) is seated correctly in guides (4).  
5 Install in the reverse order