Remove/install satellite radio control unit - AR82.60-P-7545EW
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212 with CODE (494) USA version with CODE (536) SIRIUS satellite radio
Shown on vehicle without code (489) AIRMATIC (air suspension with continuous adjustment damping)
| Remove/install | |||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| 1 | Buffer basic data from SDAR/high definition tuner control unit (N87/8) in Star Diagnosis | When replacing SDAR/high definition tuner control unit (N87/8). |
AD00.00-P-2000-04A |
| 2 | Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit | ||
| 3.1 | Remove maintenance flap (1) from left side paneling (2) | Only for vehicles without code (489) AIRmatic (air suspension with continuous adjustment damping) and/or for vehicles without code (432) Left and right dynamic multicontour seat | |
| 3.2 | Remove pneumatic pump for dynamic seat control | Only for vehicles with code (432) Left and right dynamic multicontour seat | AR91.25-P-1580EW |
| 3.3 | Remove AIRmatic central reservoir | Only for vehicles with code (489) AIRmatic (air suspension with continuous adjustment damping) |
AR32.22-P-2017EW |
| 4 | Unscrew nuts (3) | ||
| 5 | Remove bracket (4) with SDAR/high definition tuner control unit (N87/8) and lay down to side with electrical lines connected | ||
| 6 | Disconnect electrical connector (5) | ||
| 7 | Detach electrical connector with fiber optic cable (6) and cover up unit connection on the SDAR/high definition tuner control unit (N87/8) | ||
| Notes on avoiding damage to fiber optic cables during repair work | With Media Oriented System Transport (MOST) | AH82.60-P-0001-05AK | |
| 8 | Remove bracket (4) with SDAR/high definition tuner control unit (N87/8) | ||
| 9 | Unscrew nut (7) from bracket (4) and remove SDAR/high definition tuner control unit (N87/8) | When replacing the bracket (4) or the SDAR/high definition tuner control unit (N87/8). | |
| 10 | Install in the reverse order |