LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Electrical System - Body - 212 Chassis - 3 Of 8) >> Testing & Repair >> Remove/install Keyless-Go antenna >> Remove/install Keyless-Go antenna - AR82.62-P-8000EWA

Remove/install Keyless-Go antenna - AR82.62-P-8000EWA

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 212.0/1 with CODE (889) Keyless-Go in trunk 

Fig 1: Keyless Go Antenna Remove/Install Components
G09977646Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
NOTES Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
1 Remove stowage compartment beneath rear shelf (1) IMPORTANT Depending on vehicle configuration. AR68.50-P-2000-01EW
2 Remove front trunk floor paneling   AR68.30-P-4600EW
3 Disconnect electrical connector (2)    
4 Remove expansion clips (3)    
5 Remove trunk Keyless-Go antenna (A2/35)    
6 Install in the reverse order