LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Electrical System - Body - 212 Chassis - 3 Of 8) >> Testing & Repair >> Remove/install E-net compensator - AR82.70-P-0010EW

Remove/install E-net compensator - AR82.70-P-0010EW

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 212.0 with CODE (228) Stationary heater with CODE (386) Preinstallation for telephone "cell phone", UPCI [UHI] system with CODE (388) Telephone "cell phone", UPCI [UHI] system 

Fig 1: E-Net Compensator Remove/Install Components
G09977650Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
NOTES Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
1 Remove cover for carrier plate   AR68.30-P-4600EW
2 Disconnect electrical connector (3)    
3 Separate electrical connectors (4)    
4 Push catch hook (2) downwards and remove E-net compensator (A28/3) from supports (1) on carrier plate (5)    
5 Install in the reverse order