LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Electrical System - Body - 212 Chassis - 4 Of 8) >> Testing & Repair >> Remove/install additional fan for COMAND >> Remove/install additional fan for COMAND - AR82.85-P-0005EW

Remove/install additional fan for COMAND - AR82.85-P-0005EW

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 207 up to 5/31/13 up to model year 2014 with CODE 512 (COMAND APS with DVD changer) 

MODEL 207 up to 5/31/13 up to model year 2014 with CODE 527 (COMAND APS with single DVD drive (with navigation)) 

MODEL 212 up to 4/13/13 up to model year 2014 with CODE 512 (COMAND APS with DVD changer) 

MODEL 212 up to 4/13/13 up to model year 2014 with CODE 527 (COMAND APS with single DVD drive (with navigation)) 

Shown on model 212 

Fig 1: COMAND Fan Motor Remove/Install Components - Shown On Model 212 (1 Of 3)
G09977662Courtesy of MERCEDES-BENZ USA
Fig 2: COMAND Fan Motor Remove/Install Components - Shown On Model 212 (2 Of 3)
G09977663Courtesy of MERCEDES-BENZ USA
Fig 3: COMAND Fan Motor Remove/Install Components - Shown On Model 212 (3 Of 3)
G09977664Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
1 Remove steering column tube module MODEL 207 AR54.25-P-2802CW
    MODEL 212 AR54.25-P-2802EW
2 Remove left and right trim piece at instrument panel (3) MODEL 212 AR68.10-P-1180EW
3 First release cover (1) at top at pins (12), then release in lower area at catch hooks (13) toward rear and remove INSTALLATION IMPORTANT Ensure that tabs (14) are seated correctly.  
    CAUTION Long wedge Fig 4
4 Unclip steering column tube cover (2) at both ends from instrument panel (3) (arrows) and remove    
5 Remove cover (4) below dashboard on left    
6 Unscrew bolts (5) and lower steering column tube (6)    
7 Unscrew bolt (7)    
8 Slightly twist air intake pipe (8) and remove INSTALLATION NOTES
Ensure that air intake pipe (8) engages completely at COMAND fan motor (M4/13). Otherwise air intake pipe (8) may detach and cause noises.
 
9 Pull air intake duct (9) out of connection (arrow)    
10 Remove air exhaust duct (9) from COMAND fan motor (M4/13) and remove from instrument panel (3)    
11 Disconnect radio fan electrical connector (X120)    
12 Unscrew screws/bolts (10) until COMAND fan motor (M413) is detached IMPORTANT Screws/bolts (10) remain in COMAND fan motor (M4/13).  
13 Remove COMAND fan motor (M413) from air conditioner housing (A32)    
14 Install in the reverse order    
Fig 4: Identifying Long Wedge (115 589 03 59 00)
G09977665Courtesy of MERCEDES-BENZ USA