Remove/install TV tuner - AR82.85-P-7366EW
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212.0/1 with CODE 498 (Japanese version) with CODE 863 (Digital/analog TV tuner)
MODEL 212.0/1 with CODE 498 (Japanese version) with CODE 865 (TV tuner)
MODEL 218 up to model year 2015 with CODE 498 (Japanese version) with CODE 863 (Digital/analog TV tuner)
MODEL 218 up to model year 2015 with CODE 865 (TV tuner)
Shown on MODEL 212.0 with CODE 863 (Digital/analog TV tuner)
| Notes on avoiding damage to optical fibers during repair work | AH82.60-P-0001-05AK | ||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Connect diagnostic system and conduct initial startup of TV tuner (analog/digital) (A90/1) or digital TV tuner (A90/3) | When replacing the TV tuner (analog/digital) (A90/1) or digital TV tuner (A90/3). | |
| AD00.00-P-2000-04A | |||
| 2.1 | Switch off ignition and remove transmitter key from electronic ignition lock control unit | MODEL 212.0/1 with CODE 498 (Japanese version) with CODE 863 (Digital/analog TV tuner) without CODE 889 (KEYLESS-GO) MODEL 212.0/1 with CODE 498 (Japanese version) with CODE 865 (TV tuner) without CODE 889 (KEYLESS-GO) MODEL 218 up to model year 2015 with CODE 498 (Japanese version) with CODE 863 (Digital/analog TV tuner) without CODE 889 (KEYLESS-GO) MODEL 218 up to model year 2015 with CODE 865 (TV tuner) without CODE 889 (KEYLESS-GO) |
|
| 2.2 | Switch off ignition and remove KEYLESS-GO start/stop button from electronic ignition lock control unit | MODEL 212.0/1 with CODE 498 (Japanese version) with CODE 863 (Digital/analog TV tuner) with CODE 889 (KEYLESS-GO) MODEL 212.0/1 with CODE 498 (Japanese version) with CODE 865 (TV tuner) with CODE 889 (KEYLESS-GO) MODEL 218 up to model year 2015 with CODE 498 (Japanese version) with CODE 863 (Digital/analog TV tuner) with CODE 889 (KEYLESS-GO) MODEL 218 up to model year 2015 with CODE 865 (TV tuner) with CODE 889 (KEYLESS-GO) |
|
| 3 | Remove right luggage compartment lining (1) | MODEL 212.0/1 with CODE 498 (Japanese version) with CODE 863 (Digital/analog TV tuner) MODEL 212.0/1 with CODE 498 (Japanese version) with CODE 865 (TV tuner) |
AR68.30-P-4600EW |
| MODEL 218.3 up to model year 2015 with CODE 498 (Japanese version) with CODE 863 (Digital/analog TV tuner) MODEL 218.3 up to model year 2015 with CODE 865 (TV tuner) |
AR68.30-P-4600EL | ||
| 4 | Remove right load compartment trim | MODEL 218.9 up to model year 2015 with CODE 498 (Japanese version) with CODE 863 (Digital/analog TV tuner) MODEL 218.9 up to model year 2015 with CODE 865 (TV tuner) |
|
| AR68.30-P-1180ELX | |||
| 5 | Loosen nut (2) | ||
| 6 | Unscrew nuts (3) | ||
| 7 | Remove bracket (4) with TV tuner (analog/digital) (A90/1) or with digital TV tuner (A90/3) and place to one side with lines connected | ||
| 8 | Unscrew nut (5) | ||
| 9 | Separate electrical connections (6) | ||
| 10 | Disconnect electrical connector with fiber optic cable (7) | ||
| 11 | Cover up connector of electrical connection with optical fiber (7) and equipment connection on TV tuner (analog/digital) (A90/1) or digital TV tuner (A90/3) | ||
| 12 | Remove TV tuner (analog/digital) (A90/1) or digital TV tuner (A90/3) from bracket (4) | ||
| 13 | Install in the reverse order |