LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Electrical System, Equipment & Instruments - 212 Chassis - 3 Of 6) >> Testing & Repair >> Remove/install pyrofuse - AR54.10-P-1180EH

Remove/install pyrofuse - AR54.10-P-1180EH

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 212.095/098/195/298 

Fig 1: Pyrofuse Remove/Install Components
G09976946Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
NOTES Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
1 Detach ground line from on-board electrical system battery   AR54.10-P-0003EW
2 Remove cover (1) SPECIAL TOOL Mounting wedge Fig 2
3 Remove cover (2) below dashboard Rechargeable screwdriver, rechargeable drill  
4 Remove exterior lights switch (S1)   AR54.25-P-3270EW 
5 Disconnect electrical connector (3)    
6 Unscrew nuts (4)    
7 Remove pyrotechnical separator element (K88) from stud of nuts (4)    
8 Release and disconnect electrical connector (5)    
9 Remove pyrotechnical separating element (K88)    
10 Install in the reverse order    
Fig 2: Identifying Mounting Wedge (110 589 03 59 00)
G09976947Courtesy of MERCEDES-BENZ USA