Remove/install carrier for engine mount - AR22.10-P-1001MEV
ENGINE 780.009 in MODEL 451.391/491
| Risk of death when touching components on vehicles with high-voltage on-board electrical system | Do not touch components and open lines of the high-voltage on-board electrical system. Persons who wear electronic implants (e.g. cardiac pacemakers), must not carry out any work on high-voltage on-board electrical systems. | AS54.00-Z-0001-01A | |
| Note on high-voltage on-board electrical system | AH54.00-P-0010-01A | ||
| Note on high-voltage battery | AH54.10-P-0006-01MEV | ||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| 1 | Raise vehicle with vehicle lift | ||
| 2 | Support drive electric motor (M5) with telescopic lifter | ||
| 000 588 11 62 00 Major assembly mount | WS01.00-P-0092B | ||
| 3 | Remove screw/bolts (2) from the front engine suspension carrier (1) | *BA22.10-P-1012-01M | |
| 4 | Remove screw/bolt (3) for engine stabilizer mount on front engine suspension carrier (1) | *BA22.10-P-1011-01M | |
| 5 | Install in the reverse order |
ENGINE MOUNTS, ENGINE SUPPORTS
| Number | Designation | ENGINE 780.009 | |
|---|---|---|---|
| BA22.10-P-1011-01M | Screw/bolt, torque support to front engine mount carrier | Nm | 115 |
ENGINE MOUNTS, ENGINE SUPPORTS
| Number | Designation | ENGINE 780.009 | |
|---|---|---|---|
| BA22.10-P-1012-01M | Screw/bolt, carrier for front engine mount to transmission | Nm | 23 |