000 588 11 62 00 Major assembly mount - WS01.00-P-0092B

ENGINE ALL

Use in FG 01/25/27/28/33/35/41/46/47/49/55/Set B

Purpose:

Universal, transmission jack for lifting and for mounting and disassembly of major assemblies.

NOTE: Support in combination with suitable attachment (for example: transmission plate).

Reference information:

This criteria catalogue serves to provide support for selection of variants of workshop equipment available on the free market. It just describes the minimum requirement for fulfilling the Mercedes-Benz standard. There is therefore no cover to manufacturer specific equipment or devices.

Fig 1: Identifying Assembly Mount (000 588 11 62 00)

Courtesy of MERCEDES-BENZ USA

For the order the standard dimension of 35 mm should be observed. This can if necessary also be achieved by means of an adapter.

Minimum requirements:

Mercedes-Benz standard diameter for mounting hole: 35 mm
Minimum load carrying capacity for transporter: 1.0 t
Minimum load carrying capacity for commercial vehicle: 2.0 t