Retrofit BRABUS rear apron - AN88.20-P-0001MCU

MODEL 451.3/4 up to 19.3.12 with ENGINE 132.910 

Fig 1: Identifying BRABUS Rear Apron Related Components (1 Of 2)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying BRABUS Rear Apron Related Components (2 Of 2)

Courtesy of MERCEDES-BENZ USA

	Remove
1	Remove rear apron		AR88.30-P-0502MCC
	Install
2	Retrofit BRABUS muffler	The BRABUS rear apron (1) can only be installed in combination with the BRABUS muffler.	AN49.10-P-1003MCU
3	Hook left and right cover (5) into mounts (arrows) on BRABUS rear apron (1) and clip in.
4	Install expansion clip (4) on left and right covering (5).
5	Position heat shield (2) on BRABUS rear skirt (1) and tighten with bolts (6)	Cordless drill/driver
6	Hook bracket (3) of BRABUS rear apron (1) into CBS rear end (12).	Hook BRABUS rear apron (1) into same mounts on rear CBS (12) as the removed rear apron.
7	Clip catch hook (8) on BRABUS rear apron (1) into CBS rear end (12)
8	Hook BRABUS rear apron (1) into brackets (9).
9	Install expansion clips (7) on left and right on BRABUS rear apron (1)
10	Tighten bolts (11) on left and right to BRABUS rear apron (1)
11	Clip in coverings (10) on left and right above bolts (11)
12	Document retrofitted equipment via vehicle documentation (VeDoc)	Attach note "BRABUS rear apron retrofitted according to AN88.20-P-0001MCU " to field organization texts .