Remove/install microwave sensor - AR80.50-P-1100MCC

MODEL 451.3/4 with CODE (V01) Antitheft alarm system (FFO)

Shown on model 451.4

Fig 1: Identifying Microwave Sensor Remove/Install Components - Shown On Model 451.4

G10978950

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove center console	* not for USA	AR68.20-P-2000MCC
		* for USA only	AR68.20-P-2000MCU
2	Lift microwave sensor (B32), disconnect electrical connector (3) and remove microwave sensor (B32)	When replacing microwave sensor (B32) on vehicles up to production date 19.3.12 it may be required to replace the connector on the wiring harness. See: ↓ Transfer connector housing on wiring harness	AR54.18-P-0009-01MCC
3	Unclip microwave sensor (B32) from bracket (2) and remove	When replacing microwave sensor (B32). When replacing microwave sensor (B32) on vehicles up to production date 19.3.12 it may be required to replace the bracket (2).
4	Install in the reverse order