Remove/install roof peak seal - AR77.30-P-3352MCC

MODEL 451.4, 453.4 

Shown on left side of vehicle on model 451.4 

Fig 1: Identifying Roof Peak Seal Remove/Install Components - Shown On Left Side Of Vehicle On Model 451.4

Courtesy of MERCEDES-BENZ USA

Model 453.4, shown on left side of vehicle 

Fig 2: Identifying Roof Peak Seal Remove/Install Components - Shown On Left Side Of Vehicle On Model 453.4

Courtesy of MERCEDES-BENZ USA

	Notes on soft tops		AH77.30-P-0001-01MCO
	Remove
1	Open soft top
2	Remove side supports
3	Remove front roof frame paneling	Model 451.4 with code 494 (US version)	AR68.30-P-4450MCV
		Model 451.4 except code 494 (US version)	AR68.30-P-4450MCO
		Model 453.4	AR68.30-P-4450SRC
4	Unscrew bolts (5) on left and right	Model 453.4
5	Remove roof peak seal (1) starting at marked area (arrow)
6	Pull off gasket (2)
	Clean
7	Clean roof frame (3) and A-pillar (4) in area o seal (2)	Cleaner	*BR00.45-Z-1025-04A
	Install
8	Position seal (2) on roof frame (3) and A-pillar (4) on left and right	Rear window sealing profile	*BR00.45-Z-1084-01A
9	Press roof peak seal (1) on A-pillar (4) onto body flange starting at top left and top right and drive down with plastic mallet	Install roof peak seal (1) as narrow as possible in the radiuses. Leaks can occur otherwise. The roof peak seal (1) and side wall seal at the left or right must make contact in the center of the door sill without gap (arrow). Model 453.4 Ensure that guides (6) on right and left are seated correctly in body.
10	Check seating of roof peak seal (1)	In the event of complaints ↓ Realign sealing lip of roof peak seal (1)
11	Install side supports
12	Check installation position of roof peak seal (1)	In the event of complaints ↓ Realign roof peak seal (1)
13	Tighten bolts (5) on left and right	Model 453.4
14	Install front roof frame paneling	Model 451.4 with code 494 (US version)	AR68.30-P-4450MCV
		Model 451.4 except code 494 (US version)	AR68.30-P-4450MCO
		Model 453.4	AR68.30-P-4450SRC
15	Close soft top
	Check
16	Check position of roof peak seal (1) in relation to soft top	If complaint present ↓ Adjust soft top
		Model 453.4	AR77.30-P-1010SRC
		Model 451.4	AR77.30-P-1010MCO