Remove/install paneling on A-pillar - AR68.30-P-4050MCU

MODEL 451.3/4 

Shown on model 451.3 

Fig 1: Identifying Paneling On A-Pillar Remove/Install Components - Shown On Model 451.3

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove paneling from front roof frame	Model 451.3	AR68.30-P-4450MCU
		Model 451.4	AR68.30-P-4450MCV
2	Loosen edge guard (3) in area of A-pillar paneling (1)
3	Loosen edge guard (3) in area of side roof frame paneling (2)	On model 451.3
4	Remove bolt (4) from side roof frame paneling (2)	On model 451.3
5	Unhook bracket (arrow B) on side roof frame paneling (2) from A-pillar paneling (1)	On model 451.3
6	Unclip side roof frame paneling (2) in front area and unhook in area (arrow A) of A-pillar paneling (1)	On model 451.3 Loosen only the first three clips on the side roof frame paneling (2).
7	Unscrew bolt (5) from A-pillar paneling (1)
8	Unclip A-pillar paneling (1) and remove	Check clips (6), replace if necessary.
9	Install in the reverse order