Check setting of handbrake - AP42.20-P-4240MCU

MODEL 451.3/4 

	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
1	Raise vehicle with vehicle lift
	Checking
2	With the handbrake released, both rear wheels must turn freely
3	Tighten the hand brake lever 4 to 5 notches and check whether the rear wheels can still be turned	It must no longer be possible to turn the rear wheels, adjust the drum brake if necessary. If adjustment is no longer possible due to worn brake shoes, the brake shoes should be replaced. If necessary: ↓ Adjust drum brake or replace brake shoes on rear axle subject to separate repair order.
		Adjust drum brake	AR42.10-P-1010-11SM
		Remove/install brake shoes at rear axle	AR42.10-P-0165MCU