LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2016 >> iA Automatic Trans >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Charging System - Service Information >> Negative Battery Cable >> Installation [07/2015 - ] >> Procedure

Installation [07/2015 - ]: Procedure

  1. CONNECT NEGATIVE BATTERY CABLE TERMINAL 
    NOTE:

    When tightening the negative battery cable, tighten it to the specified torque. If it is not tightened to the specified torque, the battery charging/discharging may be affected.

    Refer to INSTALLATION [07/2015 - ] 

    1. Connect the negative battery cable terminal.
    2. Perform services which are required after connecting the negative battery cable terminal.

      Refer to CAUTION / NOTICE / HINT 

scientia non olet · About LEMON Manuals