Caution / Notice / Hint
WARNING:
Before removing the SRS air bag system-related parts, always disconnect the negative battery cable terminal and wait for 1 minute or more to allow the back-up power supply to deplete its stored power.
Refer to PRECAUTION [07/2015 - ]
NOTE:
With the battery connected and the ignition switched ON, or if servicing is performed for a long period (10 min or more) with the ignition switched off.
REQUIRED PROCEDURE AFTER NEGATIVE BATTERY CABLE TERMINAL DISCONNECTION/CONNECTION
| System name | Conditions after disconnecting the negative battery cable terminal | Required procedure | Reference | |
|---|---|---|---|---|
| Before disconnecting negative battery cable terminal | After connecting negative battery cable terminal | |||
| Power window control system | Reset to initial setting and auto-function is disabled. | - | Perform the power window system initial setting. | Refer to HOW TO PROCEED WITH TROUBLESHOOTING [07/2015 - ] |
| Clock system Audio and visual system |
Clock display and audio system memory are reset. | Verify the setting content. | Set the verified content before disconnecting negative battery cable terminal. | - |
| Tire pressure warning system (TPWS) | The tire pressure monitoring system detection accuracy decreases. | - | Perform the tire pressure monitoring system initialization. | Refer to PROCEDURE - Step 1 |