DTC Table For VSC:
DTC ITEM DETECTION
| DTC No. (Reference) | Detection Item | Trouble Area |
|---|---|---|
| C1201/51 | Engine control system malfunction | Engine control system |
| C1203/53 | Malfunction in ECM communication circuit |
|
| C1210/36 | Zero point calibration of yaw rate sensor undone |
|
| C1223/43 | ABS control system malfunction | ABS control system |
| C1224/44 | NE signal circuit |
|
| C1231/31 | Malfunction in steering angle sensor circuit |
|
| C1232/32 | Malfunction in deceleration sensor |
|
| C1234/34 | Malfunction in yaw rate sensor |
|
| C1336/39 | Zero point calibration of deceleration sensor undone |
|
| U0123/62 (DIAGNOSTIC TROUBLE CODE TABLE ) | Malfunction in CAN communication with yaw rate sensor |
|
| U0126/63 (DIAGNOSTIC TROUBLE CODE TABLE ) | Malfunction in CAN communication with steering position sensor |
|
HINT:
In some cases, the hand-held tester cannot be used when VSC warning lamp is always illuminated.