Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- If convertible, remove the fuel tank. Refer to Fuel Tank Replacement . If coupe, remove the carbon canister. Refer to Evaporative Emission Canister Replacement (Convertible) or Evaporative Emission Canister Replacement (Coupe)
- Disconnect the evaporative emission (EVAP) canister vent solenoid valve tube quick connect fitting. Refer to Plastic Collar Quick Connect Fitting Service .
- Depress the locking tab on the EVAP canister vent solenoid valve mount and slide the valve out of the canister.