LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2010 >> Sky Red Line, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls And Fuel - 2.4L - Repair Instructions) >> Repair Instructions >> Evaporative Emission Canister Vent Solenoid Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of EVAP Canister Vent Solenoid Valve
    GM1595619Courtesy of GENERAL MOTORS CORP.
  1. Install the EVAP canister vent solenoid valve onto the mount on the canister, push the valve forward until the locking tab engages.
  2. Connect the EVAP canister vent tube quick connect fitting. Refer to Plastic Collar Quick Connect Fitting Service .
  3. If convertible, Install the fuel tank. Refer to Fuel Tank Replacement . If coupe, install the carbon canister. Refer to Evaporative Emission Canister Replacement (Convertible)  or Evaporative Emission Canister Replacement (Coupe) 
scientia non olet · About LEMON Manuals