Front Seat Cushion Cover and Pad Replacement (with KA1)

Preliminary Procedures

1. Remove the front seat. Refer to Front Seat Replacement - Bucket .
2. Remove the front seat outer adjuster finish cover. Refer to Driver Seat and Passenger Seat Outer Adjuster Finish Cover Replacement (with Power Seat)  or Driver Seat and Passenger Seat Outer Adjuster Finish Cover Replacement (without Power Seat) .
3. Remove the front seat inner adjuster finish cover. Refer to Driver Seat and Passenger Seat Inner Adjuster Finish Cover Replacement .

Procedure

1. Disengage the j-channel retainers from the seat back cushion frame.
2. Disconnect the electrical connectors that attach to the seat back cushion, if equipped.
3. Remove the seat cushion cover and pad as an assembly.
4. Pull the cover away from the pad to disengage the retainers.