Driver Seat and Passenger Seat Outer Adjuster Finish Cover Replacement (without Power Seat)

Fig 1: Driver Seat And Passenger Seat Outer Adjuster Finish Cover

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the seat adjuster handle. Refer to Driver Seat and Passenger Seat Adjuster Handle Replacement . Remove the front seat recliner handle. Refer to Driver Seat and Passenger Seat Recliner Handle Replacement .
1	Front Seat Outer Adjuster Finish Cover Screw NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Front Seat Outer Adjuster Finish Cover Procedure Release the rear of the adjuster cover first. Pull outward from the bottom of the adjuster cover and push upward to release the cover from the seat cushion frame.

Callout

Component Name

Preliminary Procedures

Front Seat Outer Adjuster Finish Cover Screw

NOTE: Refer to Fastener Notice .

Tighten: 2 N.m (18 lb in)

Front Seat Outer Adjuster Finish Cover

Procedure

Release the rear of the adjuster cover first.
Pull outward from the bottom of the adjuster cover and push upward to release the cover from the seat cushion frame.