Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- If the shift control is being replaced, remove the shift control knob. Refer to Floor Shift Control Knob Replacement . If the shift lever is not being replaced, it is not necessary to remove the shift control knob.
- Remove the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement in Instrument Panel, Gauges and Console.
- Remove the instrument panel storage compartment. Refer to Instrument Panel Storage Compartment Replacement in Instrument Panel, Gauges and Console.
- Remove the range select lever cable from the shift control.
- Remove the park lock cable from the shift control. Park Lock Cable Replacement
- Disconnect the electrical connector.
- Remove the automatic transmission control nuts.
- Remove the automatic transmission control.