Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Disconnect the shift control cable (3) from the range select lever (4).
- Release the shift control cable retaining clip (2) and remove the cable from the shift control cable bracket (1).
- Remove the left and right console trim panels. Refer to Front Floor Console Trim Panel Replacement - Left and Front Floor Console Trim Panel Replacement - Right in Instrument Panel, Gages and Console.
- Remove the shift control cable from the automatic transmission shift control.
- Remove the shift control cable grommet at the cowl.
- Remove the shift control cable from the vehicle.