Timing Chain, Sprockets, and/or Tensioner Replacement: Notes

WARNING: This page is about a different variant/trim than selected.

Tools Required

J 38122-A Crankshaft Pulley Holder. See Special Tools .
J 43405 Engine Support Fixture Adaptor. See Special Tools .
J 44811 Accessory Belt Tensioner Unloader. See Special Tools .
SA9105E 3-Bar Engine Support Fixture. See Special Tools .
SA9127E Gage Bar Set. See Special Tools .
J 39914 Serpentine Belt Tension Unloader. See Special Tools .
J 45027 Tensioner Tool. See Special Tools .