Tools Required
WARNING: This page is about a different variant/trim than selected.
J 43654 Piston Pin Clip Remover and Installer. See Special Tools .
- Disassemble the piston rings. Use a suitable tool in order to expand the rings. The piston rings must not be reused.
- Remove the piston pin retaining clips using the J 43654 . See Special Tools .
- Remove the piston pin.
CAUTION:
Handle the piston carefully. Worn piston rings are sharp and may cause bodily injury.
IMPORTANT:
Two retainers hold the piston pins in place. No special tools are required to remove the retainers or the piston pins. Ensure that the piston pin is not damaged. Do not reuse the retaining clips.