Lights Inoperative in Content Theft Deterrent (CTD) Alarm Mode

Step	Action	Yes	No
Schematic Reference: Theft Deterrent System Schematics Connector End View Reference: Theft Deterrent System Connector End Views
1	Did you perform the Diagnostic System Check - Vehicle?	Go to Step 2	Go to Diagnostic System Check - Vehicle in Vehicle DTC Information
2	Perform one of the following to activate the content theft deterrent (CTD) alarm mode: Operate the PANIC button on the keyless entry transmitter. Complete the following steps: Open the driver window. Lock the vehicle using the power door lock switch. Close all of the doors and wait at least 30 seconds. Reach in and unlock the driver door manually. Open the driver door. Do all of the alarm mode functions activate lamp flash and horn pulse?	Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems	Go to Step 3
3	Are only the headlamps inoperative?	Go to Headlamps Inoperative - Low and High Beams in Lighting Systems	Go to Content Theft Deterrent (CTD) Alarm Mode Inoperative