Diagnostic Procedure
- Determine if DTC P0716, P0717 and P0745 are present. DTC's must be eliminated first as a possible cause for DTC P0731.
- Using scan tool, check DTC history. Duplicate temperature as when DTC was set. Perform hydraulic pressure tests. See HYDRAULIC PRESSURE TESTS If line pressure is low, go to DTC P0745.
- Air check 1st clutch operation. See TRANSMISSION SERVICING - A/T article in AUTOMATIC TRANS SERVICE section. Repair as needed. If clutch air checks okay, disassembly of transaxle will be necessary to inspect internal components.