LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 1997 >> SW2 Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 1.9L 4-CYL - VINS [7 & 8] >> Removal & Installation >> Intake Manifold >> Removal

Intake Manifold: Removal

  1. Disconnect negative battery cable. Drain coolant. Remove air cleaner assembly. Remove PCV valve. Release fuel pressure. See FUEL PRESSURE RELEASE . Disconnect fuel supply and return lines. Disconnect throttle cable from throttle body. Remove throttle cable bracket.
  2. Disconnect electrical connectors and hoses as necessary. Remove support bracket between intake manifold and engine block. Remove accessory drive belt. Remove power steering pump, and position it aside (leave hoses attached). Remove intake manifold nuts. Remove intake manifold.
scientia non olet · About LEMON Manuals