LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 1997 >> SW2 Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 1.9L 4-CYL - VINS [7 & 8] >> Removal & Installation >> Cylinder Head >> Removal

Cylinder Head: Removal

  1. Disconnect negative battery cable. Drain coolant. Remove air cleaner assembly. Disconnect accelerator cable. Disconnect electrical connectors and hoses as necessary. Release fuel pressure. See FUEL PRESSURE RELEASE . Disconnect fuel lines.
  2. Remove front cover and timing chain. See FRONT COVER & TIMING CHAIN . Using a 6-point socket (a 12-point socket will round off bolt heads), uniformly loosen cylinder head bolts in reverse order of tightening sequence, in several stages. See Figure or Figure. Remove cylinder head.
scientia non olet · About LEMON Manuals