LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2010 >> 9-3X Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Convertible Top) >> Repair Instructions >> Solenoid valve (647a/b/c) >> To fit

To fit

WARNING: This page is about a different car, the 2011 Saab 9-3 and 2010 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the valve in position for fitting.
    Fig 1: Illustration For Step 1-3
    G05566469Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Fit and tighten the bolts securing the valve.
    NOTE: If the "green" valve has been changed: Turn back the "orange" valve and tighten the bolts.
  3. Plug in the valve's connector.
    IMPORTANT: The hydraulic valve connectors have the following colors: Blue, green and orange. The top of the valve housing is marked for the respective color: "B" for blue, "G" for green and "O" for orange.
  4. Open and close the soft top for 5 complete cycles to bleed the system and check its function.
  5. Check for any fluid leaks.
  6. Check the oil level and top up as necessary. See CHECKING/FILLING OIL . Use 89 96 860 Power steering fluid.
  7. Connect the diagnostics tool and erase any diagnostic trouble code.
  8. Fit Luggage compartment side trim. See LUGGAGE COMPARTMENT TRIM, CV .
scientia non olet · About LEMON Manuals